The automated pit monitoring system utilizes v...
Read More >>
These case studies highlight how GeoSitter's monitoring instruments, data management software and hydraulic jacks for pile load test excel in a number of projects.
The system solution provided by GeoSitter can be tailored to local conditions, integrating various monitoring equipment such as deep displacement monitoring, underground water seepage pressure monitoring of sliding bodies, displacement monitoring of tension cracks at the rear edge of landslides, rainfall monitoring, underground water level monitoring, stress monitoring, surface water infiltration detection, etc., providing comprehensive and accurate data support for relevant departments to comprehensively analyze landslide causes, early warning or engineering treatment design. By adopting the landslide monitoring and early warning linkage method, real-time monitoring of changes in data at various monitoring points on the geologic hazard site can be achieved.
Monitoring Items | Monitoring Parameters | Monitoring Instruments | Monitoring Position |
Deformation Monitoring | Surface displacement | BeiDou high-precision receiver | Top of retaining wall |
Surface displacement | Total station | Slope surface | |
Surface displacement | Surface displacement sensor | Slope surface | |
Internal displacement | Inclinometer | Key position's inclinometer tube | |
Stress/Strain and Force Monitoring | Anchor rod's axial stress | Anchor dynamometer, anchor cable stress meter | Anchoring section |
Soil body pressure | Earth pressure cell | Retaining wall | |
Environmental Monitoring | Temperature (environmental temperature) | Temperature sensor, or strain gauge with built-in temperature sensor | Placed separately inside and outside the slope body |
Underground water monitoring | Water level gauge | Groundwater level pipes in critical areas | |
Rainfall monitoring | Rain gauge | Open areas on the slope |
By deploying a slope monitoring instrument, real-time deformation monitoring and early warning can be achieved, greatly reducing the risk of geological hazards such as landslides and collapses in geotechnical engineering.
GeoSitter Monitoring Data Platfomm enhances the safety of projects in various cases with the advantages:
Developed by Engineering Experts
Compatible with Other Instruments and Software
Data Can Be Easily and Intelligently Managed
Features Highly Customizable Options
The Image Displacememnt Sensor can be used for bridges, riverbanks, and tunnels.
Technical Indicators | |
Monitoring Distance | 1-500m (with different focal length lenses) |
Resolution | ±0.1mm (at 50m distance) |
Monitoring Precision | ±0.5mm (at 50m distance) |
Sampling Rate | Dynamic 30Hz; Static >1s |
Transmission Method | 4G/Ethernet |
Equipment Power | <10W |
Operating Temperature | -30°C to 70°C |
The automatic rain gauge is an advanced instrument designed for accurate measurement of rainfall intensity and amount.
Model | GS-RG03 |
Working Temperature | 0°C to 50°C |
Measuring Rainfall Intensity | ≤ 4 mm/min |
Resolution | 3.14 ml is 0.1 mm, 6.28 ml is 0.2 mm |
Output Signal | RS485 |
Protection Level | IP67 |
Working Voltage | 12-24 V DC |
This GNSS sensor is a cutting-edge instrument designed for accurate measurement of surface displacement.
Model | GS-GNSS07 |
Planarity Accuracy | ±(2.5 + 1 × 10⁻⁶ × D) mm |
Height Accuracy | ±(5.0 + 1 × 10⁻⁶ × D) mm |
Protection Level | IP65 |
Operating Temperature | -40°C to +80°C |
Signal Tracking | GPS: L1C/A, L2C, L5 GLONASS: L1C/A, L1P, L2C/A, L2P BDS: B1, B2, B3 SBAS: L1C/A, L5 (supports WASS, EGNOS, and MSAS) Reserved for Galileo GIOVE-A and GIOVE-B |
Communication | GPRS/4G module (CORS), radio communication module, Beidou communication |
Wireless displacement sensor is generally used for fixed objects such as large bridges, dams (gravity dams, earth-rock dams, tailings dams), and large buildings for deformation monitoring. Also used for natural objects such as landslides, mudslides, and ground subsidence monitoring.
Technical Indicators | |
Measurement Range: | 0~3000mm |
Operating Temperature: | -25°C ~ 85°C |
Resolution: | 0.01mm |
Power Supply: | 5~24V |
Lifespan: | > 10,000,000 times |
Resolution: | 0.02, 0.025, 0.05, 0.1mm |
Output Form: | RS485 |
Storage Temperature: | -35°C ~ 95°C |
Output Signal: | RS485 |
Operating Force: | Approximately 6N |
The Inclino_Robot_IRA inclinometer offers precise angle measurements for monitoring and controlling tilt and inclination in pile foundations, slopes, tunnel, structural heath, dam, etc.
| Model | IRA-30 |
Operating Temperature | -10~60℃ |
Measuring Range | ±30° |
Size | 295mm × 275mm × 233mm |
Resolution | 0.02mm/500mm |
Instrument Weight | 24kg |
Accuracy | 0.25mm/m |
Instrument Wheelbase | 500mm |
The ground water level meter is a state-of-the-art instrument designed for accurate measurement of groundwater levels and subsurface water pressure changes.
Model | GS-GLMI03 |
Collection Method | Lora/NB wireless collection |
Pressure Range | -0.1 to 60 MPa |
Wide Temperature Operation | -35 to 75°C |
Accuracy Level | 0.1% |
Calibration Method | 485 communication multi-point calibration |
Pressure Overload | Overload less than 20% |
Protection Level | IP68 |
Power Supply Mode | 3.5V to 12V |
Battery Capacity | 9000 mAh |
Emission Current | <130 mA |
Copyright @ 2026 GeoSitter All Rights Reserved
